Quality fully-enclosed stepdown transformer with fold up metal carry handles, approved 3-wire power cord and US style 3 pin 110 - 115V socket.

250 watt stepdown with electrical isolation (Dielectric Isolation).- Rated at 250VA (watts) 2.2 amps - Size: 133(w) x 81(d) x 98(h)mm - Weight: 3.2kgs...

500 watt stepdown with electrical isolation (Dielectric Isolation).- Rated at 500VA (watts) 4.2 amps- Size: 158(w) x 100(d) x 120(h)mm- Weight: 6kgs...

High power stepdown with electrical isolation (Dielectric Isolation).- Rated at 1000VA 8.6amp.- Size: 195(L) x 120(W) x 140(H)mm.- Weight: 11kg- Now w...

Includes overheat protection. If the unit gets too hot, the thermal fuse will open, then close after unit cools down, restoring operation.Two pin US s...

Designed to tap 100V (or 70V 1/2 power) public address amplifier lines to use an 8 ohm speaker.

Versatile 1.9VA iron core mains transformer with centre-tap output
• 6.3V to 12.6V output
• Maximum current output of 150mA

Versatile 30VA iron core mains transformer with multi-tap output
• 15V to 30V output
• Maximum current output of 1A

Versatile 18VA iron core mains transformer with multi-tap output
• 12V to 18V output
• Maximum current output of 1A

Versatile 72VA iron core mains transformer with single 24V output
• Maximum current output of 3A

Versatile 7VA iron core mains transformer with centre-tap 6.30V to 12.6V output. Maximum current output of 500mA.

Versatile 60VA iron core mains transformer with multi-tap output
• Dual 9V and 12V output
• Maximum current output of 2.5A (x2)

Versatile 100VA iron core mains transformer with multi-tap output
• Dual 12V and 15V output
• Maximum current output of 3A (x2)

Versatile 1.35VA iron core mains transformer with centre-tap output
• 4.5V to 9.0V output
• Maximum current output of 150mA

Versatile 3.6VA iron core mains transformer with centre-tap output of 12V, 24V or 24V (12V per side).

A Centre Tapped transformer works in more or less the same way as a usual transformer. The difference lies in just the fact that its secondary winding is divided into two parts, so two individual voltages can be acquired across the two line ends.

Ideal for use when electrical isolation is needed.

Run your 12V devices from 24V in a truck or bus. Capable of 7A continuous output.

Run your 12V devices from 24V in a truck or bus. Capable of 15A continuous output.

DC speed controllers are ideal for slowing down pumps and motors or dimming lights but commonly use resistance circuits and are very inefficient. The ...